LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Prius Five >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 118 (Door Lock System (Plug-In) (Service Information)) >> Door Control Switch >> Inspection >> Inspection

Door Control Switch: Inspection: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT DOOR CONTROL SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Inspecting Door Control Switch Assembly
      GTY334016Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      4 (L) - 3 (E) Locked Below 1 Ω
      4 (L) - 3 (E) off 10 kΩ or higher
      2 (UL) - 3 (E) Unlocked Below 1 Ω
      2 (UL) - 3 (E) off 10 kΩ or higher
      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (Door Control Switch Assembly)
      *b Unlock
      *c Lock

      If the result is not as specified, replace the door control switch assembly.

scientia non olet · About LEMON Manuals