Mass Air Flow Meter: Installation: Installation

WARNING: This page is about a different car, the 2012 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL MASS AIR FLOW METER
1. Install the mass air flow meter with the 2 screws.
  Torque: 1.0 N*m (10 kgf*cm, 9 in.*lbf)
  
  Fig 1: Locating Screws And Mass Air Flow Meter
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE:
  Make sure that the O-ring is not cracked or does not jump out of position during installation.
2. Connect the mass air flow meter connector.