Rear Lateral Control Rod: Installation: Installation

TEMPORARILY TIGHTEN REAR LATERAL CONTROL ROD

Fig 1: Locating Rear Lateral Control Rod Assembly Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Install the lateral control rod and provisionally tighten the bolt.
2. Provisionally tighten the bolt and nut.
  
  Fig 2: Locating Lateral Control Rod Assembly Bolt And Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
STABILIZE SUSPENSION
1. Jack down the vehicle.
2. Bounce the vehicle up and down several times to stabilize the suspension.
FULLY TIGHTEN REAR LATERAL CONTROL ROD

Fig 3: Locating Rear Lateral Control Rod Assembly Bolts And Nut
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Fully tighten the 2 bolts.
  Torque: 130 N*m (1, 326 kgf*cm, 96 ft.*lbf)
  
  HINT:
  
  While fixing the nut, turn and install the bolt.