LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> FJ Cruiser 4WD, Automatic T/Case Control >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System (Service Information) >> VVT Sensor >> Removal >> Removal

VVT Sensor: Removal: Removal

  1. REMOVE V-BANK COVER  . Refer to REMOVAL - Step 3
  2. REMOVE AIR CLEANER HOSE ASSEMBLY  . Refer to REMOVAL - Step 4
  3. REMOVE VVT SENSOR (for Intake Side of Bank 1) 
    1. Disconnect the sensor connector.
      Fig 1: Identifying VVT Sensor (For Intake Side of Bank 1)
      GTY187835Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and sensor.
  4. REMOVE VVT SENSOR (for Exhaust Side of Bank 1) 
    1. Disconnect the sensor connector.
      Fig 2: Identifying VVT Sensor (For Exhaust Side of Bank 1)
      GTY173078Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and sensor.
  5. REMOVE VVT SENSOR (for Intake Side of Bank 2) 
    1. Disconnect the sensor connector.
      Fig 3: Identifying VVT Sensor (For Intake Side of Bank 2)
      GTY173080Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and sensor.
  6. REMOVE VVT SENSOR (for Exhaust Side of Bank 2) 
    1. Disconnect the sensor connector.
      Fig 4: Identifying VVT SENSOR (For Exhaust Side of Bank 2)
      GTY173100Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and sensor.
scientia non olet · About LEMON Manuals