LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Avalon Limited >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Supplemental Restraint System (Service Information) >> Center Airbag Sensor Assembly >> Removal >> Removal

Center Airbag Sensor Assembly: Removal: Removal

  1. PRECAUTION 
    WARNING:

    Be sure to read the "PRECAUTION" thoroughly before servicing. Refer to PRECAUTION .

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    WARNING:

    Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY  . Refer to REMOVAL - Step 32 .
  4. REMOVE CONSOLE PANEL SUB-ASSEMBLY UPPER  . Refer to REMOVAL - Step 35 .
  5. REMOVE CONSOLE BOX ASSEMBLY  . Refer to REMOVAL - Step 37 .
  6. REMOVE CONSOLE BOX FRONT  . Refer to REMOVAL - Step 38 .
  7. REMOVE CONSOLE BOX DUCT NO. 1 
  8. REMOVE CENTER AIRBAG SENSOR ASSEMBLY 
    1. Disconnect the holder (with connectors) from the center airbag sensor assembly.
      Fig 1: View Of Center Airbag Sensor Assembly And Bolts
      GTY201771Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 3 bolts and the center airbag sensor assembly.
scientia non olet · About LEMON Manuals