DTC P2610: ECM / PCM Internal Engine Off Timer Performance: Procedure

REPLACE ECM
1. Replace the ECM. Refer to REMOVAL .
NEXT: Go to next step
CHECK WHETHER DTC OUTPUT RECURS (P2610)
1. Connect Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Clear the DTCs. Refer to DTC CHECK / CLEAR .
5. Start the engine and wait for 10 minutes or more.
6. Enter the following menus: Powertrain / Engine / Trouble Codes / Pending.
7. Read the pending DTCs.
  HINT:
  
  If no pending DTCs are output to the Techstream, the repair has been successfully completed.
NEXT → END