Occupant Classification Ecu: Removal: Removal

PRECAUTION
WARNING:
Be sure to read Precaution thoroughly before servicing. Refer to DIAGNOSIS SYSTEM .
NOTE:
- When removing the front seat assembly RH, perform zero point calibration and the sensitivity check. Refer to DIAGNOSIS SYSTEM .
- When replacing the occupant classification ECU, perform zero point calibration and the sensitivity check. Refer to DIAGNOSIS SYSTEM .
REMOVE FRONT SEAT ASSEMBLY RH
HINT:

Refer to the procedures up to Remove Front Seat Assembly. Refer to REMOVAL .
REMOVE OCCUPANT CLASSIFICATION ECU
1. Disconnect the 2 connectors.
  
  Fig 1: Identifying Occupant Classification ECU
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a screwdriver, detach the claw and remove the occupant classification ECU.
  HINT:
  
  Tape the screwdriver tip before use.
  TEXT IN ILLUSTRATION
  
  *1 Protective Tape