Steering Angle Sensor: Removal: Removal
- PRECAUTION WARNING:
Be sure to read the "PRECAUTION" thoroughly before servicing. Refer to PRECAUTION .
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL WARNING:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- PLACE FRONT WHEELS FACING STRAIGHT AHEAD
- REMOVE STEERING PAD ASSEMBLY . Refer to REMOVAL - Step 2
- REMOVE STEERING WHEEL ASSEMBLY . Refer to REMOVAL - Step 4
- REMOVE STEERING COLUMN COVER . Refer to REMOVAL - Step 5
- REMOVE SPIRAL CABLE SUB-ASSEMBLY . Refer to REMOVAL - Step 6
- REMOVE STEERING ANGLE SENSOR
- Detach the 6 claws and remove the sensor from the spiral cable.