LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> RAV4 Base, 3.5 K, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Stability Control System (Diagnostics - Introduction) >> Vehicle Stability Control System >> Problem Symptoms Table >> Problem Symptoms Table

Problem Symptoms Table

HINT: 

NOTE:

When replacing the brake actuator or sensor, turn the ignition switch off.

VEHICLE STABILITY CONTROL SYSTEM

Symptom Suspected Area See
ABS, BA and/or EBD does not operate Check for DTCs again and make sure that normal system code displayed. Refer to DTC CHECK / CLEAR 
IG power source circuit Refer to DTC C1241: Low Power Supply Voltage Malfunction
Front speed sensor circuit Refer to DTC C1405: Open or Short in Front Speed Sensor RH Circuit; DTC C1406: Open or Short in Front Speed Sensor LH Circuit
Rear speed sensor circuit Refer to DTC C1407: Open or Short in Rear Speed Sensor RH Circuit; DTC C1408: Open or Short in Rear Speed Sensor LH Circuit
Check brake actuator using Techstream (Check brake actuator operation using Active Test function). If abnormal, check hydraulic circuit for leakage. Refer to ON-VEHICLE INSPECTION
If symptoms still occur even after above circuits in suspected areas inspected and proved to be normal, replace brake actuator (skid control ECU). Refer to REMOVAL
ABS, BA and/or EBD does not operate efficiently Check for DTCs again and make sure that normal system code displayed. Refer to DTC CHECK / CLEAR 
Front speed sensor circuit Refer to DTC C1405: Open or Short in Front Speed Sensor RH Circuit; DTC C1406: Open or Short in Front Speed Sensor LH Circuit
Rear speed sensor circuit Refer to DTC C1407: Open or Short in Rear Speed Sensor RH Circuit; DTC C1408: Open or Short in Rear Speed Sensor LH Circuit
Stop light switch circuit Refer to Stop Light Switch Circuit
Check brake actuator using Techstream (Check brake actuator operation using Active Test function). If abnormal, check hydraulic circuit for leakage. Refer to ON-VEHICLE INSPECTION
If symptoms still occur even after above circuits in suspected areas inspected and proved to be normal, replace brake actuator (skid control ECU). Refer to REMOVAL
VSC and/or TRAC does not operate Check for DTCs again and make sure that normal system code displayed. Refer to DTC CHECK / CLEAR 
IG power source circuit Refer to DTC C1241: Low Power Supply Voltage Malfunction
Check hydraulic circuit for leakage -
Front speed sensor circuit Refer to DTC C1405: Open or Short in Front Speed Sensor RH Circuit; DTC C1406: Open or Short in Front Speed Sensor LH Circuit
Rear speed sensor circuit Refer to DTC C1407: Open or Short in Rear Speed Sensor RH Circuit; DTC C1408: Open or Short in Rear Speed Sensor LH Circuit
Yaw rate sensor circuit Refer to DTC C1232: Acceleration Sensor Stuck Malfunction; DTC C1243: Acceleration Sensor Stuck Malfunction; DTC C1245: Acceleration Sensor Output Malfunction
Steering angle sensor circuit Refer to DTC C1432: Steering Angle Sensor Power Source Voltage Malfunction
If symptoms still occur even after above circuits in suspected areas inspected and proved to be normal, replace brake actuator (skid control ECU). Refer to REMOVAL
Sensor signal check cannot be performed TS and CG terminal circuit Refer to TS and CG Terminal Circuit
Brake actuator (skid control ECU) Refer to REMOVAL
DTC check cannot be performed Check for DTCs again and make sure that normal system code displayed. Refer to DTC CHECK / CLEAR 
TC and CG terminal circuit Refer to TC and CG Terminal Circuit
If symptoms still occur even after above circuits in suspected areas inspected and proved to be normal, replace brake actuator (skid control ECU). Refer to REMOVAL
ABS warning light abnormal (Remains on) ABS warning light circuit Refer to ABS Warning Light Remains ON
Brake actuator (skid control ECU) Refer to REMOVAL
ABS warning light abnormal (Does not come on) ABS warning light circuit Refer to ABS Warning Light does not Come ON
Brake actuator (skid control ECU) Refer to REMOVAL
VSC OFF indicator light abnormal (Remains on) VSC OFF indicator light circuit Refer to VSC OFF Indicator Light Remains ON
Brake actuator (skid control ECU) Refer to REMOVAL
VSC OFF indicator light abnormal (Does not come on) VSC OFF indicator light circuit Refer to VSC OFF Indicator Light does not Come ON
Brake actuator (skid control ECU) Refer to REMOVAL
BRAKE warning light abnormal (Remains on) BRAKE warning light circuit Refer to Brake Warning Light Remains ON
Brake actuator (skid control ECU) Refer to REMOVAL
BRAKE warning light abnormal (Does not come on) BRAKE warning light circuit Refer to Brake Warning Light does not Come ON
Brake actuator (skid control ECU) Refer to REMOVAL
Slip indicator light abnormal (Remains on) Slip indicator light circuit Refer to Slip Indicator Light Remains ON
Brake actuator (skid control ECU) Refer to REMOVAL
Slip indicator light abnormal (Does not come on) Slip indicator light circuit Refer to Slip Indicator Light does not Come ON
Brake actuator (skid control ECU) Refer to REMOVAL
TRAC OFF indicator light (Remains on) TRAC OFF indicator light circuit Refer to TRAC OFF Indicator Light Remains ON
Brake actuator (skid control ECU) Refer to REMOVAL
TRAC OFF indicator light (Does not come on) TRAC OFF indicator light circuit Refer to TRAC OFF Indicator Light does not Come ON
Brake actuator (skid control ECU) Refer to REMOVAL
Skid control buzzer abnormal Skid control buzzer circuit Refer to Skid Control Buzzer Circuit
Brake actuator (skid control ECU) Refer to REMOVAL
Downhill assist control does not operate*1 Check for DTCs again and make sure that normal system code displayed. Refer to DTC CHECK / CLEAR 
Downhill assist control indicator light circuit Refer to Downhill Assist Control Indicator Light does not Come ON
If symptoms still occur even after above circuits in suspected areas inspected and proved to be normal, replace brake actuator (skid control ECU). Refer to REMOVAL
Downhill assist control indicator light abnormal (Remains on)*1 Downhill assist control indicator light circuit Refer to Downhill Assist Control Indicator Light Remains ON
Brake actuator (skid control ECU) Refer to REMOVAL
Downhill assist control indicator light abnormal (Does not come on)*1 Downhill assist control indicator light circuit Refer to Downhill Assist Control Indicator Light does not Come ON
Brake actuator (skid control ECU) Refer to REMOVAL
Hill-start assist control does not operate*2 Brake actuator (skid control ECU) Refer to REMOVAL
AUTO LSD does not operate*3 Check for DTCs again and make sure that normal system code displayed. Refer to DTC CHECK / CLEAR 
VSC OFF switch circuit Refer to AUTO LSD Indicator Light does not Come ON
AUTO LSD indicator light circuit Refer to AUTO LSD Indicator Light does not Come ON
If symptoms still occur even after above circuits in suspected areas inspected and proved to be normal, replace brake actuator (skid control ECU). Refer to REMOVAL
AUTO LSD indicator light abnormal (Remains on)*3 AUTO LSD indicator circuit Refer to AUTO LSD Indicator Light Remains ON
Brake actuator (skid control ECU) Refer to REMOVAL
AUTO LSD indicator light abnormal (Does not come on)*3 AUTO LSD indicator circuit Refer to AUTO LSD Indicator Light does not Come ON
Brake actuator (skid control ECU) Refer to REMOVAL

HINT: 

*1: w/ Downhill Assist Control

*2: w/ Hill-start Assist Control

*3: for 2WD