LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> RAV4 Base, 2.5 F, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System (Diagnostics - Introduction) >> Power Window Control System >> DTC Check / Clear >> DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch ON and turn the tester on.
    3. Check the DTC(s).
  2. CLEAR DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch ON and turn the tester on.
    3. Check that "DTCs are cleared" is displayed.
      NOTE:

      If any DTCs are output, troubleshoot those DTCs again.

scientia non olet · About LEMON Manuals