LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Matrix Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock (Service Information) >> Door Control Switch >> Inspection >> Inspection

Door Control Switch: Inspection: Inspection

  1. INSPECT POWER WINDOW MASTER SWITCH 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Inspecting Power Window Master Switch Connector Terminals
      GTY200261Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      1 (E) - 2 (L) Lock Below 1 Ω
      1 (E) - 2 (L)
      1 (E) - 9 (UL)      		 OFF (Free) 10 kΩ or higher
      1 (E) - 9 (UL) Unlock Below 1 Ω

      If the result is not specified, replace power window master switch.

  2. INSPECT DOOR CONTROL SWITCH ASSEMBLY (for Front Passenger Side) 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 2: Inspecting Door Control Switch Connector Terminals
      GTY232236Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      3 (E) - 4 (L) Lock Below 1 Ω
      3 (E) - 4 (L)
      2 (UL) - 3 (E)      		 OFF (Free) 10 kΩ or higher
      2 (UL) - 3 (E) Unlock Below 1 Ω

      If the result is not specified, replace door control switch.

scientia non olet · About LEMON Manuals