Purge Valve: Installation: Installation

INSTALL PURGE VSV
1. Install the purge VSV with the bolt.
  
  Fig 1: Identifying VSV And Fastener
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
2. Connect the wire harness clamp.
  
  Fig 2: Identifying Wire Harness Clamp, Vacuum Hoses & Purge VSV Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the 2 vacuum hoses and purge VSV connector.
INSTALL V-BANK COVER SUB-ASSEMBLY . Refer to INSTALLATION - Step 102