LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> 4Runner Limited, AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (1GR-FE) (Service Information) >> Accelerator Pedal >> Removal >> Removal

Accelerator Pedal: Removal: Removal

  1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY 
    1. Disconnect the accelerator pedal position sensor connector.
      Fig 1: Identifying Nuts & Accelerator Pedal Sensor Component
      GTY221713Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 nuts and accelerator pedal sensor.
scientia non olet · About LEMON Manuals