LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> 4Runner Limited, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Emission Control System (1GR-FE) (Service Information) >> Purge Valve >> Installation >> Installation

Purge Valve: Installation: Installation

  1. INSTALL PURGE VSV 
      Fig 1: Identifying Purge VSV & Fastener
      GTY235184Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Install the purge VSV with the bolt.

      Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf) 

      2. Fig 2: Identifying Purge VSV Connector, No. 1 Fuel Vapor Feed Hose & Vapor Feed Hose
      GTY225117Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the 2 purge line hoses.
    3. Connect the purge VSV connector.
  2. INSTALL V-BANK COVER  . Refer to INSTALLATION - Step 9
scientia non olet · About LEMON Manuals