LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> Tundra Base, 5.7 W >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Brake Control/Dynamic Control System) >> VSC Off Switch >> Inspection

VSC Off Switch: Inspection

WARNING: This page is about a different car, the 2009 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT TRACTION CONTROL SWITCH 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

      RESISTANCE REFERENCE

      Tester Connection Condition Specified Condition
      6 - 9 Switch is pressed Below 1 Ω
      Switch is not pressed 10 kΩ or higher
      Fig 1: Identifying VSC OFF Switch
      G05649628Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002