LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> Tundra Base, 5.7 W >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Brake Control/Dynamic Control System) >> Skid Control Buzzer >> Removal

Skid Control Buzzer: Removal

WARNING: This page is about a different car, the 2009 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  2. REMOVE COWL SIDE TRIM BOARD LH  (See REMOVAL )
  3. REMOVE INSTRUMENT SIDE PANEL LH  (See REMOVAL )
  4. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH  (See REMOVAL )
  6. REMOVE SKID CONTROL BUZZER ASSEMBLY 
    1. Detach the clamp and remove the buzzer.
    2. Disconnect the buzzer connector.
      Fig 1: Identifying Skid Control Buzzer Assembly
      G05159875Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals