LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> Tundra Base, 5.7 W >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Brake Control/Dynamic Control System) >> Brake Actuator >> Reassembly

Brake Actuator: Reassembly

WARNING: This page is about a different car, the 2009 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY 
    1. Using a T30 "TORX" wrench, install the actuator bracket with the 3 screws.

      Torque: 9.5 N*m (97 kgf*cm, 84 in.*lbf) 

scientia non olet · About LEMON Manuals