LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> Tundra Base, 5.7 W >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Brake Control/Dynamic Control Systems) >> Yaw Rate And Deceleration Sensor >> Inspection

Yaw Rate And Deceleration Sensor: Inspection

WARNING: This page is about a different car, the 2008 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK YAW RATE SENSOR 
    1. Check the yaw rate sensor. If any of the following occurs, replace the sensor with a new one:
      • The surface of the sensor is cracked, dented, or chipped.
      • The connector is scratched, cracked, or damaged.
      • The sensor has been dropped.
scientia non olet · About LEMON Manuals