LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> Tundra Base, 4.0 U >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Brake Control/Dynamic Control System) >> Steering Angle Sensor >> Inspection

Steering Angle Sensor: Inspection

WARNING: This page is about a different car, the 2009 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK STEERING ANGLE SENSOR 
    1. Check the steering angle sensor. If any of the following occurs, replace the sensor with a new one:
      • The surface of the sensor is cracked, dented, or chipped.
      • The connector is scratched, cracked, or damaged.
      • The sensor has been dropped.
scientia non olet · About LEMON Manuals