LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Control System (Service Information)) >> Crankshaft Position Sensor >> Removal >> Removal

Crankshaft Position Sensor: Removal: Removal

WARNING: This page is about a different car, the 2010 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE GENERATOR ASSEMBLY 
    1. Remove the generator. Refer toREMOVAL .
  2. SEPARATE COOLER COMPRESSOR ASSEMBLY  . Refer toREMOVAL - Step 18
  3. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the sensor connector.
      Fig 1: Identifying Crankshaft Position Sensor & Bolt
      GTY173102Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and sensor.
scientia non olet · About LEMON Manuals