LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> RAV4 Limited, 2.5 F, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2AR-FE) (Service Information) >> Camshaft Position Sensor >> Removal >> Removal

Camshaft Position Sensor: Removal: Removal

  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY  See step  2
  2. REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side) 
    Fig 1: Locating Bolt And Sensor
    GTY194950Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
  3. REMOVE CAMSHAFT POSITION SENSOR (for Intake Side) 
    Fig 2: Locating Bolt And Sensor
    GTY222367Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
scientia non olet · About LEMON Manuals