LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> Matrix Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Engine Immobilizer (Diagnostics - Introduction) >> Engine Immobilizer System >> DTC Check/Clear >> DTC Check/Clear

DTC Check/Clear

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical/(desired system)/Trouble Codes.
    5. Check the details of the DTC(s). Refer to DIAGNOSTIC TROUBLE CODE CHART .
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical/(desired system)/Trouble Codes.
    5. Erase the DTC(s).
scientia non olet · About LEMON Manuals