LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> Highlander SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2GR-FE) (Service Information) (Except Hybrid) >> Integration Relay >> Installation >> Installation

Integration Relay: Installation: Installation

  1. INSTALL ENGINE ROOM JUNCTION BLOCK ASSEMBLY 
    1. Connect the 4 connectors.
      Fig 1: Locating Engine Room Junction Block Assembly Connectors
      GTY193978Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Attach the engine room junction block assembly.
  2. INSTALL NO. 1 RELAY BLOCK COVER 
    1. Install the No. 1 relay block cover.
      Fig 2: Identifying No. 1 Relay Block Cover
      GTY189732Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL RESERVOIR BRACKET  . Refer to INSTALLATION - Step 61
  4. INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY  . Refer to INSTALLATION - Step 62
scientia non olet · About LEMON Manuals