LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> Camry XLE, 2.5 F >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Brake Control System (Service Specifications) (Except Hybrid) >> Brake Control >> Service Data >> Service Data

Service Data

Front speed sensor for BOSCH LH 1 (FL+) - 2 (FL-) Always 0.92 to 1.22 kΩ at 20 °C(68°F)
1 (FL+) - Body ground Always 10 kΩ or higher
2 (FL-) - Body ground Always 10 kΩ or higher
RH 1 (FR+) - 2 (FR-) Always 0.92 to 1.22 kΩ at 20 °C(68°F)
1 (FR+) - Body ground Always 10 kΩ or higher
2 (FR-) - Body ground Always 10 kΩ or higher
for ADVICS LH 1 (FL+) - 2 (FL-) Always 1.4 to 1.8 kΩ at 20°C (68 °F)
1 (FL+) - Body ground Always 10 kΩ or higher
2 (FL-) - Body ground Always 10 kΩ or higher
RH 1 (FR+) - 2 (FR-) Always 1.4 to 1.8 kΩ at 20°C (68 °F)
1 (FR+) - Body ground Always 10 kΩ or higher
2 (FR-) - Body ground Always 10 kΩ or higher
Skid control sensor for BOSCH LH 1 (RR+) - 2 (RR-) Always Below 2.2 kΩ
1 (RR+) - Body ground Always 10 kΩ or higher
2 (RR-) - Body ground Always 10 kΩ or higher
RH 1 (RL+) - 2 (RL-) Below Always Below 2.2 kΩ
1 (RL+) - Body ground 10 Always 10 kΩ or higher
2 (RL-) - Body ground Always 10 kΩ or higher
for ADVICS LH 2 (RL+) - 1 (RL-) Always 0.9 to 2.1 kΩ
2 (RL+) - Body ground Always 10 kΩ or higher
1 (RL-) - Body ground Always 10 kΩ or higher
RH 2 (RR+) - 1 (RR-) Always 0.9 to 2.1 kΩ
2 (RR+) - Body ground Always 10 kΩ or higher
1 (RR-) - Body ground Always 10 kΩ or higher
VSC NO. 1 (Fail Safe) relay     Resistance 3 - 5 Always 10 kΩ or higher
Resistance 3 - 5 Apply B+ between terminals 1 and 2 Below 1 Ω
VSC NO. 1 relay     Resistance 3 - 5 Always 10 kΩ or higher
Resistance 3 - 5 Apply B+ between terminals 1 and 2 Below 1 Ω
VSC OFF switch     Resistance 6 - 3 Switch is pushed in Below 1 Ω
    Resistance 6 - 3 Switch is not pushed in 10 kΩ or higher