LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> 4Runner SR5, 2.7 X >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System (2TR-FE) (Service Information) >> Throttle Body >> Inspection >> Inspection

Throttle Body: Inspection: Inspection

  1. INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω
      Fig 1: Identifying Component Without Harness Connected
      GTY230271Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Throttle Body with Motor)

      If the result is not as specified, replace the throttle body with motor assembly.

scientia non olet · About LEMON Manuals