Fuel Pump: Disassembly

REMOVE FUEL SENDER GAUGE ASSEMBLY (See REMOVAL )

Fig 1: Locating Fuel Sender Gauge Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FUEL PUMP
1. Disconnect the connector of the fuel pump harness.
  
  Fig 2: Locating Connector Of Fuel Pump Harness
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the fuel pump filter hose.
  
  Fig 3: Locating Fuel Pump Filter Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws, and remove the fuel filter and fuel pump.
  
  Fig 4: Identifying Fuel Filter & Fuel Pump Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Disengage the 2 claws and remove the fuel suction support.
  
  Fig 5: Identifying Fuel Suction Support Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws, and remove the fuel pump filter and fuel pump from the fuel filter.
  NOTE:
  - Do not damage the fuel pump filter.
  - Do not remove the suction filter.
  - Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.
  Fig 6: Locating Fuel Pump Filter Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Disconnect the fuel pump harness.
  
  Fig 7: Locating Fuel Pump Harness
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. Remove the O-ring.
  
  Fig 8: Locating O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FUEL PRESSURE REGULATOR ASSEMBLY
1. Using a screwdriver with its tip wrapped in protective tape, remove the pressure regulator assembly.
  NOTE: Do not damage the fuel filter
  
  Fig 9: Locating Fuel Pressure Regulator Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 O-rings.
  
  Fig 10: Locating O-Rings
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002