Camshaft Position Sensor: Inspection

INSPECT CAMSHAFT POSITION SENSOR

Check the resistance.

Using an ohmmeter, measure the resistance between the terminals.

Fig 1: Inspecting Camshaft Position Sensor

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard resistance

RESISTANCE REFERENCE

Temperature	Specified Condition
Cold	1,630 to 2,740 Ω
Hot	2,065 to 3,225 Ω

HINT:

In the table above, the terms Cold and Hot refer to the temperature of the coils. Cold means approximately -10 to 50°C (14 to 122°F). Hot means approximately 50 to 100°C (122 to 212°F).

If the resistance is not as specified, replace the camshaft position sensor.