Charging Systems: Generator: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE ENGINE UNDER COVER RH
REMOVE FAN AND GENERATOR V BELT (See REMOVAL )
REMOVE GENERATOR ASSEMBLY
1. Remove the terminal cap.
2. Separate the connector and the harness clamp.
3. Remove the nut and remove terminal B.
  
  Fig 1: Locating Connector & Harness Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove fan belt adjusting slider fixing bolts A and B and remove the fan belt adjusting slider.
  
  Fig 2: Identifying Fan Belt Adjusting Slider Fixing Bolts A & B
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove fixing bolt B and remove the generator.
  
  Fig 3: Identifying Fixing Bolt B
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002