LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Yaris Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Engine Control System) >> Camshaft Position Sensor >> Removal

Camshaft Position Sensor: Removal

WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE RADIATOR SUPPORT OPENING COVER  (See REMOVAL  )
  2. REMOVE ENGINE UNDER COVER LH 
  3. REMOVE ENGINE UNDER COVER RH 
  4. DRAIN ENGINE COOLANT  (See COOLANT )
  5. DRAIN HV COOLANT  (See REPLACEMENT )
  6. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  7. REMOVE INVERTER WITH CONVERTER 
    1. Remove the inverter with converter (see REMOVAL ).
  8. REMOVE CAMSHAFT POSITION SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
scientia non olet · About LEMON Manuals