High Mounted Stop Light Assembly: Installation
WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL BACK DOOR TRIM UPPER PANEL ASSEMBLY (See REASSEMBLY )
- INSTALL CENTER STOP LIGHT ASSEMBLY
- Install the center stop light with 2 screws.
- Connect the connector.
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM INITIALIZATION
- Perform initialization (see INITIALIZATION
).NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
- Perform initialization (see INITIALIZATION
).