Microphone Amplifier: Installation

WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL MICROPHONE AMPLIFIER ASSEMBLY
1. Install the microphone amplifier.
  
  Fig 1: Locating Microphone Amplifier Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector.
  
  Fig 2: Locating Microphone Amplifier Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Attach the 4 claws to install the amplifier cover.
  
  Fig 3: Identifying Amplifier Cover Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the print board with the 3 screws.
INSTALL MAP LIGHT ASSEMBLY (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  
  Fig 4: Locating Print Board Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002