Combination Meter: Reassembly

WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL COMBINATION METER CASE
INSTALL NO. 4 METER CIRCUIT PLATE
NOTE: When reassembling the combination meter assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.
1. Push the connector lock in the direction indicated by the arrow in Fig 1, and install the meter circuit plate.
  
  Fig 1: Pushing Connector Lock
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 3 METER CIRCUIT PLATE
NOTE: When reassembling the combination meter assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.
1. Push the connector lock in the direction indicated by the arrow in Fig 2, and install the meter circuit plate.
  
  Fig 2: Pushing Connector Lock
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 3 COMBINATION METER COVER
1. Attach the 2 claws to install the combination meter cover.
2. Install the 4 screws.
  
  Fig 3: Installing No. 3 Combination Meter Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 COMBINATION METER REFLECTOR
1. Install the combination reflector with the screw.
  
  Fig 4: Installing No. 1 Combination Reflector With Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the 4 clips.
  
  Fig 5: Installing Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 3 COMBINATION METER CASE
INSTALL NO. 2 METER CIRCUIT PLATE
NOTE: When reassembling the combination meter assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.
1. Attach the 4 claws to install the meter circuit plate.
  
  Fig 6: Attaching Meter Circuit Plate Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Push the connector lock in the direction indicated by the arrow in Fig 7 and install the No. 4 meter circuit plate from the No. 2 meter circuit plate.
  
  Fig 7: Pushing Connector Lock
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 COMBINATION METER COVER
NOTE: When reassembling the combination meter assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.
1. Attach the 2 claws to install the combination meter cover.
  
  Fig 8: Attaching Combination Meter Cover Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the 2 screws.
  
  Fig 9: Installing No. 2 Combination Meter Case With Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 COMBINATION METER CASE
INSTALL METER CIRCUIT PLATE
NOTE: When reassembling the combination meter assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.
1. Attach the 5 claws to install the meter circuit plate.
  
  Fig 10: Attaching Meter Circuit Plate Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Push the connector lock in the direction indicated by the arrow in Fig 11 and install the No. 3 meter circuit plate to the meter circuit plate.
  
  Fig 11: Pushing Connector Lock
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 COMBINATION METER COVER
1. Attach the 2 claws to install the combination meter cover.
  
  Fig 12: Attaching Combination Meter Cover Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the 2 screws.
  
  Fig 13: Installing Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002