Service Data
Vehicle Height (Unloaded Vehicle)
VEHICLE HEIGHT (UNLOADED VEHICLE) SERVICE DATA
| Engine | Model | Front A - B | Rear C - D |
|---|---|---|---|
| 1AR-FE | 2WD | 116.4 mm (4.582 in.) | 33.9 mm (1.335 in.) |
| AWD | 116.9 mm (4.602 in.) | 30.8 mm (1.213 in.) | |
| 2GR-FE | 2WD | 117.7 mm (4.634 in.) | 31.0 mm (1.220 in.) |
| AWD | 117.8 mm (4.638 in.) | 31.8 mm (1.252 in.) |
Measurement points:
- Ground clearance of front wheel center
- Ground clearance of No. 2 lower suspension arm bushing set bolt center
- Ground clearance of rear wheel center
- Ground clearance of strut rod set bolt center
Camber (Unloaded Vehicle)
CAMBER (UNLOADED VEHICLE) SERVICE DATA
| - | Engine | Model | Camber Inclination | Right-left Difference |
|---|---|---|---|---|
| Front | 1AR-FE | 2WD | -0°35' +/- 45' (-0.58° +/- 0.75°) | 45' (0.75°) or less |
| AWD | -0°36' +/- 45' (-0.60° +/- 0.75°) | |||
| 2GR-FE | 2WD | -0°36' +/- 45' (-0.60° +/- 0.75°) | ||
| AWD | -0°36' +/- 45' (-0.60° +/- 0.75°) | |||
| Rear | 1AR-FE | 2WD | -1°13' +/- 45' (-1.22° +/- 0.75°) | |
| AWD | -0°47' +/- 45' (-0.78° +/- 0.75°) | |||
| 2GR-FE | 2WD | -1O-I4- +/. 45' (.1.23° +/- 0.75°) | ||
| AWD | -0°48' +/- 45' (-0.80° +/- 0.75°) |
Wheel Turning Angle (Unloaded Vehicle)
WHEEL TURNING ANGLE (UNLOADED VEHICLE) SERVICE DATA
| - | Model | Inside Wheel | Outside Wheel Reference |
|---|---|---|---|
| Front | 2WD | 35°12' +/- 2° (35.20° +/- 2°) | 31°24' (31.40°) |
| AWD | 35°12' +/- 2° (35.20° +/- 2°) | 31°24' (31.40°) |