Torque Specifications
2GR-FE ENGINE MECHANICAL TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Camshaft bearing cap x Camshaft housing | 1st | 10 | 102 | 7 |
| 2nd | 16 | 163 | 12 | |
| Camshaft housing x Cylinder head sub-assembly | 28 | 286 | 21 | |
| No. 3 Chain tensioner x Cylinder head sub-assembly | 21 | 214 | 15 | |
| Camshaft timing gear assembly x Camshaft | 100 | 1020 | 74 | |
| Camshaft timing exhaust gear assembly x Camshaft | 100 | 1020 | 74 | |
| No. 2 Chain tensioner x Cylinder head sub-assembly | 21 | 214 | 15 | |
| Cylinder head sub-assembly LH x Cylinder block sub-assembly | Recessed head 1st | 36 | 367 | 27 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| 3nd | Turn 90° | Turn 90° | Turn 90° | |
| 14 mm (0.551 in.) head | 30 | 306 | 22 | |
| Cylinder head sub-assembly RH x Cylinder block sub-assembly | 1st | 36 | 367 | 27 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| 3nd | Turn 90° | Turn 90° | Turn 90° | |
| Crankshaft pulley x Crankshaft | 250 | 2550 | 184 | |
| Drive plate and ring gear sub-assembly x Crankshaft | 83 | 846 | 61 | |
| No. 1 engine hanger x Cylinder head sub-assembly | 33 | 337 | 24 | |
| No. 2 engine hanger x Cylinder head sub-assembly | 33 | 337 | 24 | |
| Rear engine mounting bracket x Cylinder block | 64 | 649 | 47 | |
| Engine mounting bracket RH x Timing chain cover assembly | 54 | 550 | 40 | |
| Transfer stiffener plate RH x Rear engine mounting bracket | Bolt A | 34 | 347 | 25 |
| Bolt B | 78 | 795 | 58 | |
| Manifold stay x Exhaust manifold sub-assembly RH | 34 | 347 | 25 | |
| Manifold stay x Rear engine mounting bracket | 34 | 347 | 25 | |
| Engine mounting insulator LH x Transaxle | 95 | 968 | 70 | |
| Engine mounting insulator RH x Engine mounting bracket RH | 95 | 968 | 70 | |
| Front crossmember sub-assembly x Engine mounting insulator RH | 87 | 887 | 64 | |
| Front crossmember sub-assembly x Front engine mounting insulator | 52 | 530 | 38 | |
| Front crossmember sub-assembly x Rear engine mounting insulator | 52 | 530 | 38 | |
| Front engine mounting insulator x Front engine mounting bracket | 87 | 887 | 64 | |
| Rear engine mounting insulator x Rear engine mounting bracket | 75 | 764 | 55 | |
| Front crossmember sub-assembly x Body | Bolt A | 85 | 866 | 62 |
| Bolt B | 32 | 326 | 24 | |
| Bolt C | 85 | 866 | 62 | |
| Bolt D | 32 | 326 | 24 | |
| Front crossmember sub-assembly x Front floor brace | 11 | 112 | 8 | |
| Drive plate x Torque converter | 41 | 418 | 30 | |
| Flywheel housing under cover x Transaxle housing cover | 7.8 | 78 | 69 in.*lbf | |
| No. 1 exhaust pipe support bracket x Oil pan sub-assembly | 21 | 214 | 15 | |
| Engine moving control rod x No. 1 front engine mounting bracket LH | Bolt A | 38 | 387 | 28 |
| Except bolt A | 52 | 530 | 38 | |
| No. 2 engine mounting stay RH x No. 1 front engine mounting bracket LH | Bolt | 35 | 387 | 28 |
| Nut | 23 | 234 | 17 | |
| Engine wire bracket x Body | 8.3 | 85 | 73 in.*lbf | |
| Engine wire x Body | 10 | 102 | 7 | |
| Engine wire x Engine room junction block | 8.0 | 85 | 74 in.*lbf | |
| Positive battery terminal x Engine wire | 13 | 130 | 9 | |
| Transmission control cable x Control shaft lever | 13 | 130 | 9 | |
| Inlet No. 1 air cleaner x Body | 5.0 | 51 | 44 in.*lbf | |
| Positive battery terminal x Battery terminal nut | 5.4 | 55 | 47 in.*lbf | |
| Inlet No. 2 air cleaner x Upper radiator support sub-assembly | 5.0 | 51 | 44 in.*lbf | |
| Air cleaner case x Engine mounting insulator LH | 5.0 | 51 | 44 in.*lbf | |
| Battery clamp x Upper radiator support sub-assembly | 9.0 | 92 | 80 in.*lbf | |
| Battery clamp x Battery clamp bolt | 3.5 | 36 | 31 in.*lbf | |
| Engine rear oil seal retainer x Cylinder block sub-assembly | 10 | 102 | 7 | |
| Water inlet pipe x Cylinder block sub-assembly | 10 | 102 | 7 | |
| No. 1 Chain vibration damper x Cylinder block sub-assembly | 23 | 230 | 17 | |
| Idle sprocket assembly x Cylinder block sub-assembly | 60 | 612 | 44 | |
| No. 1 Chain tensioner x Cylinder head sub-assembly | 10 | 102 | 7 | |
| Water pump assembly x Timing chain cover sub-assembly | 11 | 112 | 8 | |
| Stud bolt x Water inlet housing | 4.0 | 41 | 35 in.*lbf | |
| Water inlet housing x Timing chain cover sub-assembly | 10 | 102 | 7 | |
| Drain cock assembly x Water inlet housing | 30 | 306 | 22 | |
| Drain cock plug x Drain cock assembly | 13 | 130 | 9 | |
| Water inlet x Water inlet housing | 10 | 102 | 7 | |
| Stud bolt x Front No. 1 engine mounting bracket LH | 10 | 102 | 7 | |
| Front No. 1 engine mounting bracket LH x Timing chain cover sub-assembly | 54 | 550 | 40 | |
| Oil pan baffle plate x Cylinder block sub-assembly | 10 | 102 | 7 | |
| Oil pan stud bolt x Timing chain cover sub-assembly | 10 | 102 | 7 | |
| Oil pan stud bolt x Cylinder block | 9.0 | 92 | 80 in.*lbf | |
| Oil pan sub-assembly x Cylinder block and timing chain cover sub-assembly | Bolt A | 10 | 102 | 7 |
| Except bolt A | 21 | 214 | 15 | |
| Oil strainer stud bolt x Timing chain cover sub-assembly | 4.0 | 41 | 35 in.*lbf | |
| Oil strainer sub-assembly x Cylinder block and timing chain cover sub-assembly | 10 | 102 | 7 | |
| Oil pan stud bolt x Oil pan sub-assembly | 4.0 | 41 | 35 in.*lbf | |
| No. 2 oil pan sub-assembly x Oil pan sub-assembly | 10 | 102 | 7 | |
| Oil pan drain plug x No. 2 oil pan sub-assembly | 40 | 408 | 30 | |
| Cylinder head cover sub-assembly (for BANK 1) x Cylinder head sub-assembly LH | Bolt A | 21 | 214 | 15 |
| Except bolt A | 10 | 102 | 7 | |
| Cylinder head cover sub-assembly (for BANK 2) x Cylinder head sub-assembly RH | Bolt A | 21 | 214 | 15 |
| Except bolt A | 10 | 102 | 7 | |
| Water outlet x Cylinder head sub-assembly | 10 | 102 | 7 | |
| Engine oil level dipstick guide x Cylinder block sub-assembly | 21 | 214 | 15 | |
| Stud bolt x No. 1 oil cooler bracket | 10 | 102 | 7 | |
| Oil cooler pipe x No. 1 oil cooler bracket | 21 | 214 | 16 | |
| No. 1 oil cooler bracket w/ Oil cooler pipe x Oil pan sub-assembly and Cylinder block sub-assembly | 21 | 214 | 16 | |
| No. 1 oil cooler bracket x Oil cooler assembly | 68 | 693 | 50 | |
| Water by-pass hoses x Clamp | 10 | 102 | 7 | |
| Oil filter cap x Oil pan sub-assembly | 25 | 255 | 18 | |
| Oil filter cap x Drain plug | 13 | 127 | 9 | |
| Cylinder block water drain cock sub-assembly x Cylinder block sub-assembly | 25 | 255 | 18 | |
| Cylinder block water drain cock sub-assembly x Water drain cock plug | 13 | 130 | 9 | |
| Oil pipe union x Cylinder block sub-assembly | 65 | 663 | 48 | |
| Oil pipe union x Cylinder head cover sub-assembly | 65 | 663 | 48 | |
| Oil pipe x Cylinder head sub-assembly | 10 | 102 | 7 | |
| Ventilation valve x Cylinder head cover sub-assembly (for BANK 1) | 27 | 275 | 20 | |
| Engine oil pressure switch assembly x Oil pan sub-assembly | 15 | 153 | 11 | |
| No. 1 vacuum switching valve assembly x Cylinder head cover sub-assembly (for BANK 2) | 10 | 102 | 7 | |
| Radio setting condenser x Cylinder head cover sub-assembly | 10 | 102 | 7 | |
| No. 2 idler pulley sub-assembly x Timing chain cover sub-assembly | 54 | 550 | 40 | |
| No. 2 timing gear cover x Timing chain cover sub-assembly | 6.0 | 61 | 53 in.*lbf | |
| V-ribbed belt tensioner assembly x Cylinder block sub-assembly | 43 | 438 | 32 | |
| Exhaust manifold sub-assembly LH x Cylinder head sub-assembly LH | 21 | 214 | 15 | |
| No. 2 engine oil level dipstick guide x Cylinder head sub-assembly | 21 | 214 | 15 | |
| Exhaust manifold sub-assembly RH x Cylinder head sub-assembly RH | 21 | 214 | 15 | |
| Intake manifold x Cylinder head sub-assembly | 21 | 214 | 15 | |
| Throttle body bracket x Cylinder head cover sub-assembly (for Bank 1) | 21 | 214 | 15 | |
| No. 1 surge tank stay x Cylinder head cover sub-assembly (for Bank 2) | 21 | 214 | 15 | |
| No. 2 engine mounting stay RH x Intake manifold | 21 | 214 | 15 | |
| Stud bolt x Cylinder head sub-assembly | Bolts A and B | 10 | 102 | 7 |
| Bolt C | 4.0 | 41 | 35 in.*lbf | |
| No. 1 straight screw plug x Cylinder head sub-assembly | 44 | 449 | 32 | |
| No. 2 straight screw plug x Cylinder head sub-assembly | 80 | 816 | 59 | |
| Stud bolt x Cylinder block sub-assembly | Bolt A | 10 | 102 | 7 |
| Bolt B | 17 | 173 | 13 | |
| No. 1 oil nozzle sub-assembly x Cylinder block sub-assembly | 9.0 | 92 | 80 in.*lbf | |
| Main bearing cap x Cylinder block sub-assembly | 1st | 61 | 622 | 45 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| 14 mm head | 52 | 525 | 38 | |
| Connecting rod cap x Connecting rod | 1st | 25 | 255 | 18 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |