LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Venza 2.7 E, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Power Management Control Ecu >> Removal

Power Management Control Ecu: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE RH  (See REMOVAL )
  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH  (See REMOVAL )
  3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE POWER MANAGEMENT CONTROL ECU 
    1. Disconnect the 2 connectors.
    2. Remove the 2 nuts and the power management control ECU.
    Fig 1: Locating Power Management Control ECU Connector
    G06027345Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals