LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Tundra Base, 5.7 W >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Installation

Transfer Assembly: Installation

  1. INSTALL TRANSFER ASSEMBLY 
    1. Install the transfer with the 8 bolts.

      Torque: 40 N*m (408 kgf*cm, 30 ft.*lbf) 

      NOTE: Take care not to damage the rear adaptor oil seal with the transfer input gear spline.
      Fig 1: Installing Transfer Assembly
      G05158955Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER ASSEMBLY (for A750F) 
    1. Install the automatic transmission with transfer assembly (see INSTALLATION ).
  3. INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER ASSEMBLY (for AB60F) 
    1. Install the automatic transmission with transfer assembly (see INSTALLATION ).
  4. ADD TRANSFER OIL  (see REPLACEMENT  )
  5. CHECK TRANSFER OIL  (see REPLACEMENT  )
  6. CHECK FOR TRANSFER OIL LEAK 
scientia non olet · About LEMON Manuals