LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Tundra Base, 5.7 W >> Repair and Diagnosis >> General Information >> OEM General Information >> Service Specifications >> 3UR-FBE Fuel System >> Service Data

Service Data

Fuel pressure 

FUEL PRESSURE - SERVICE DATA

at idle Fuel flow when the fuel pressure switching valve is off 270 to 330 kPa (2.75 to 3.37 kgf/cm2 , 39.2 to 47.9 psi)
Fuel flow when the fuel pressure switching valve is on 370 to 430 kPa (3.77 to 4.38 kgf/cm2 , 53.7 to 62.4 psi)
remains for 5 minutes after engine has stopped 147 kPa (1.5 kgf/cm2 , 21 psi) or more

Fuel injector 

FUEL INJECTOR - SERVICE DATA

Resistance: at 20°C (68°F) 11.6 to 12.4 Ω
Injection volume 97 to 118 cm3 (5.9 to 7.2 cu in.) per 15 seconds
Difference between each cylinder 21 cm3 (1.3 cu in.) or less
Fuel leakage 1 drop or less per 12 minutes

Fuel pressure switching valve 

FUEL PRESSURE SWITCHING VALVE - SERVICE DATA

Tester Connection Condition Specified Condition
1 - Body ground Always 10 MΩ or higher
2 - Body ground
1 - 2 20°C (68°F) 5 to 10 Ω

Fuel pump 

FUEL PUMP - SERVICE DATA

Tester Connection Condition Specified Condition
4 - 5 20°C (68°F) 0.2 to 3.0 Ω

Fuel sender gauge 

FUEL SENDER GAUGE - SERVICE DATA

Tester Connection Condition Specified Condition
2 - 4 Float level is F (upper) 12 to 18 Ω
Float level is E (lower) 405 to 415 Ω