LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Tundra Base, 5.7 W >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> VSC Off Switch >> Inspection

VSC Off Switch: Inspection

  1. INSPECT VSC OFF SWITCH 
    1. Measure the resistance according to the value (s) in the table below.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION TABLE

      Tester Connection Switch Condition Specified Condition
      6-9 Pressed Below 1 Ω
      Not pressed 10 kΩ or higher

      If the value is not as specified, replace the VSC OFF switch.

      Fig 1: Identifying VSC Off Switch Connector Terminal
      G05649628Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals