Rear Power Window Switch: Removal

HINT:

• Use the same procedures for the LH side and RH side.
• The procedures listed below are for the LH side.

1. REMOVE REAR UPPER DOOR ARMREST BASE PANEL LH 
   1. Using a screwdriver, detach the 2 clips and 5 claws, and remove the rear upper door armrest base panel.
      Fig 1: Identifying Rear Upper Door Armrest Base Panel LH

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT:

      Tape the screwdriver tip before use.

   2. Disconnect the connector.
      Fig 2: Identifying Rear Upper Door Armrest Base Panel LH Connectors

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY 
   1. Detach the 2 claws and remove the regulator switch.
      Fig 3: Identifying Rear Power Window Regulator Switch Assembly

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002