Rear Power Window Switch: Inspection
- INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Standard resistance
STANDARD RESISTANCE TESTER CONNECTION SPECIFIED CONDITIONTester Connection Switch Condition Specified Condition 4 (U) - 3 (B) UP Below 1 Ω 1 (D) - 2 (SD) 4 (U) - 5 (SU) OFF 1 (D) - 2 (SD) 4 (U) - 5 (SU) DOWN 1 (D) - 3 (B) Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the result is not as specified, replace the regulator switch.
- Measure the resistance according to the value(s) in the table below.