Skid Control Buzzer: Installation

INSTALL SKID CONTROL BUZZER ASSEMBLY
1. Connect the buzzer connector.
  NOTE: Securely connect the connector.
2. Attach the clamp to install the buzzer.
  NOTE:
  - Securely insert the clamp into the bracket of the instrument panel reinforcement.
  - If the buzzer is dropped, replace it.
    
    Fig 1: Identifying Skid Control Buzzer Assembly
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH (See INSTALLATION )
INSTALL COWL SIDE TRIM BOARD LH (See INSTALLATION )
INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab) (See INSTALLATION )
REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab, CrewMax) (See )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: Some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).