LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Tacoma X-Runner >> Repair and Diagnosis >> Engine Performance >> Engine Control System (1GR-FE) >> EFI Relay >> Inspection

EFI Relay: Inspection

  1. INSPECT EFI RELAY 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard 

        RESISTANCE SPECIFICATION

        Tester Connection Specified Condition
        3 - 5 10 kΩ or higher
        3 - 5 Below 1 Ω (Apply battery voltage to terminals 1 and 2)

        If the result is not as specified, replace the EFI relay.

        Fig 1: Inspecting EFI Relay
        G04968682Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals