LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Tacoma PreRunner, 2D Pickup >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2TR-FE) >> EFI Relay >> Inspection

EFI Relay: Inspection

  1. INSPECT EFI RELAY 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.
        Fig 1: Inspecting EFI Relay
        G05677387Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        Standard 

        TESTER CONNECTIONS SPECIFIED CONDITIONS CHART

        Tester Connection Specified Condition
        3 - 5 10 kΩ or higher
        3 - 5 Below 1 Ω (Apply battery voltage to terminals 1 and 2)

        If the result is not as specified, replace the E.F.I, relay.

scientia non olet · About LEMON Manuals