LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Tacoma PreRunner, 2D Pickup >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Traction Off Switch >> Inspection

Traction Off Switch: Inspection

  1. INSPECT A-TRAC SWITCH 
    1. Measure the resistance according to the value(s) in the table below.

    Standard resistance 

    STANDARD RESISTANCE REFERENCE

    Tester Connection Switch Condition Specified Condition
    5 - 8 Pressed Below 1 Ω
    Not pressed 10 kΩ or higher

    If the value is not as specified, replace the A-TRAC switch.

    Fig 1: Identifying A-TRAC Switch Connector
    G06083583Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals