LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Tacoma PreRunner, 2D Pickup >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Rear Speed Sensor >> Removal

Rear Speed Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE REAR SPEED SENSOR 
    1. Disconnect the speed sensor connector.
    2. Remove the nut and speed sensor rear.
    NOTE:
    • Do not attach any foreign matter to the sensor tip.
    • Ensure that no foreign matter enters the sensor installation hole.
    Fig 1: Locating Rear Speed Sensor Nut
    G05199372Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals