LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Tacoma PreRunner, 2D Pickup >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Downhill Assist Control Switch >> Inspection

Downhill Assist Control Switch: Inspection

  1. INSPECT DOWNHILL ASSIST CONTROL SWITCH 
    1. Measure the resistance according to the value(s) in the table below.

    Standard resistance 

    STANDARD RESISTANCE REFERENCE

    Tester Connection Switch Condition Specified Condition
    3 - 4 Pressed Below 1 Ω
    Not pressed 10 kΩ or higher

    If the value is not as specified, replace the downhill assist control switch.

    Fig 1: Identifying Downhill Assist Control Switch
    G06083783Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals