Data List/Active Test
- DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- Warm up the engine.
- Turn the ignition switch off.
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Operate the Techstream according to the display and select Data List.
Engine and ECT
ENGINE AND ECT - DATA LISTTester Display Measurement Item/Range Normal Condition Diagnostic Note Engine Speed Engine speed:
Min.: 0 rpm
Max.: 16383.75 rpm600 to 700 rpm: Idling(1)
650 to 750 rpm: Idling(2)- Coolant Temp Engine coolant temperature:
Min.: -40°C
Max.: 140°C80 to 100°C (176 to 203°F) After warning up - If value is -40°C (-40°F): sensor circuit open
- If value is 140°C (284°F): sensor circuit shorted
(1) for 2TR-FE (2) for 1GR-FE ABS/VSC/TRAC
ABS/VSC/TRAC - DATA LISTTester Display Measurement Item/Range Normal Condition Diagnostic Note Vehicle Speed Maximum wheel speed sensor reading
Min.: 0 km/h (0 mph)
Max.: 326 km/h (202 mph)Actual vehicle speed Speed indicated on speedometer