How To Proceed With Troubleshooting

HINT:

*: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP 
2. CUSTOMER PROBLEM ANALYSIS 
3. PROBLEM SYMPTOM CONFIRMATION 

   SYMPTOM DOES NOT OCCUR (Go to step 4 

   SYMPTOM OCCURS  (Go to step  5)

4. SYMPTOM SIMULATION 
5. CHECK CAN COMMUNICATION SYSTEM 
   1. Check the battery voltage.

      Standard Voltage: 

      11 to 14 V 

6. DTC CHECK* 
   1. Check for cruise control system DTC output.

   DTCS BEEN STORED (Go to step 7) 

   NO DTC OUTPUT  (Go to step  8)

7. DTC CHART 
8. PROBLEM SYMPTOM TABLE 
9. CIRCUIT INSPECTION* 
10. TERMINALS OF ECU 
11. IDENTIFICATION OF PROBLEM 
12. REPAIR OR REPLACE 
13. CONFIRMATION TEST* 

    NEXT: END