LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Sienna XLE Limited, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Audio/Visual) >> Stereo Jack Adapter Assembly >> Installation

Stereo Jack Adapter Assembly: Installation

WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL STEREO JACK ADAPTER ASSEMBLY 
    1. Engage the 2 claws and install the stereo jack adapter assembly.
  2. INSTALL INSTRUMENT PANEL HOLE COVER ASSEMBLY  (See INSTALLATION )
  3. INSTALL INSTRUMENT PANEL BOX ASSEMBLY  (See INSTALLATION )
    Fig 1: Identifying Claws On Stereo Jack Adapter Assembly
    G06010613Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle)  (See INSTALLATION )
  5. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle)  (See INSTALLATION )
  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)  (See INSTALLATION )
  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)  (See INSTALLATION )
  8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH  (See INSTALLATION )
  9. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH  (See INSTALLATION )
scientia non olet · About LEMON Manuals