Stereo Component Amplifier: Installation

WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY
1. Install the stereo component amplifier assembly with the 2 bolts.
2. Connect each connector.
Fig 1: Identifying Stereo Component Amplifier Assembly With Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AUDIO AMPLIFIER COVER
1. Engage the 2 clips and install the audio amplifier cover.
INSTALL FRONT SEAT ASSEMBLY RH
HINT:

Use the same procedure for the RH side and the LH side (See INSTALLATION ).
INSPECT FRONT SEAT SLIDE ADJUSTER LOCK (See INSTALLATION )

Fig 2: Identifying Audio Amplifier Cover Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INNER SEAT TRACK COVER RH
HINT:

Use the same procedure for the RH side and the LH side (See INSTALLATION ).
INSTALL OUTER SEAT TRACK COVER RH
HINT:

Use the same procedure for the RH side and the LH side (See INSTALLATION ).
INSTALL FRONT SEAT HEADREST ASSEMBLY RH
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Front Seat Side Airbag)
INSPECT SRS WARNING LIGHT (w/ Front Seat Side Airbag)

(See DIAGNOSIS SYSTEM )